Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
ICAP Interface Support
Configuring ICAP Interface Support ▀
Cisco ASR 5000 Series Enhanced Feature Configuration Guide ▄
OL-22983-01
Notes:
In StarOS 8.1, the
keyword enables ACS in the Optimized mode, wherein ACS
functionality is managed by SessMgrs. In StarOS 8.1, ACS must be enabled in the Optimized mode.
In StarOS 8.3, the
keyword is obsolete. With or without this keyword ACS is always
enabled in Optimized mode.
In StarOS 8.0 and StarOS 9.0 and later, the
keyword is not available.
Configuring Charging Action for ICAP Server Group
Use the following example to configure the charging action to forward HTTP/WAP GET request to ICAP server for
content processing:
content processing:
Verifying the ICAP Server Group Configuration
This section explains how to display and review the configurations after saving them in a .cfg file as described in
Verifying and Saving Your Configuration chapter of this guide and also to retrieve errors and warnings within an active
configuration for a service.
Verifying and Saving Your Configuration chapter of this guide and also to retrieve errors and warnings within an active
configuration for a service.
Important:
All commands listed here are under Exec mode. Not all commands are available on all platforms.
These instructions are used to verify the configuration for this feature.
Step 1
Verify your ICAP Content Filtering Server Group configuration by entering the following command in Exec Mode: