Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Rejection/Redirection of HA Sessions on Network Failures
Configuring HA Session Redirection ▀
Cisco ASR 5000 Series Enhanced Feature Configuration Guide ▄
OL-22983-01
Configuring HA Session Redirection
This section provides instructions for configuring rejection or redirection of HA sessions on the event of a network
failure. These instructions assume that there is a destination context. and HA service, an IP pool, and a subscriber
already configured and that you are at the root prompt for the Exec mode:
failure. These instructions assume that there is a destination context. and HA service, an IP pool, and a subscriber
already configured and that you are at the root prompt for the Exec mode:
Step 1
Enter the global configuration mode by entering the following command:
The following prompt appears:
Step 2
Enter context configuration mode by entering the following command:
is the name of the destination context where the HA service is configured. The name must be from 1
to 63 alpha and/or numeric characters and is case sensitive.
The following prompt appears:
Step 3
Enter the HA service configuration mode by entering the following command:
is the name of the HA service. The name must be from 1 to 63 alpha and/or numeric characters
and is case sensitive.
The following prompt appears:
Step 4
Configure the action for the HA service to take when network connectivity is lost by entering the following command: