Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas

Descargar
Página de 580
  ICAP Interface Support 
ICAP Interface Support Overview  ▀   
Cisco ASR 5000 Series Enhanced Feature Configuration Guide  ▄  
 
  OL-22983-01 
Content charging is performed by the Active Charging Service (ACS) only after the request has been controlled by the 
application server. This guarantees the appropriate interworking between the external application and content-based 
billing. In particular, this guarantees that charging will be applied to the appropriate request in case of redirection, and 
that potential charging-based redirections (i.e. Advice of Charge, Top Up page, etc.) will not interfere with the decisions 
taken by the application server. 
Functions of the ACF include: 
 
 
Retrieval of subscriber policies based on the subscriber identity passed in the ICAP message 
 
Determining the appropriate action (permit, deny, redirect) to take for the type of content based on subscriber 
profile 
 
Communication of the action (permit, deny, or redirect) decision for the URL back to the ACS module 
 
Failure Action on Retransmitted Packets  
ICAP rating is enabled for retransmitted packet when default ICAP failure action was taken on an ICAP request for that 
flow. ICAP default failure action is taken on the pending ICAP request for a connection when the connection needs to 
be reset and there is no other redundant connection available. For example, in the ICAP request timeout and ICAP 
connection timeout scenarios. In these cases the retransmitted packet in the uplink direction is sent for ICAP rating 
again. 
In case of WAP CO, uplink retransmitted packet for the WAP transactions for which ICAP failure action was taken will 
be sent for ICAP rating. WSP header of the retransmitted packet is not parsed by the WSP analyzer. The URL received 
in the previous packet for that transaction is used for ICAP rating. If failure action was taken on multiple WTP 
transactions for the same flow (case: WTP concatenated GET request) then uplink retransmitted packet for each of the 
transaction is sent for rating again. 
In case of HTTP, uplink retransmitted packets for the HTTP flow on which ICAP failure action is taken is sent for ICAP 
rating. The URL present in the current secondary session (last uplink request) is used for ICAP rating. However, if there 
were multiple outstanding ICAP request for the same flow (pipelined request) then for the retransmitted packet the URL 
that will be sent for rating will be that of the last GET request. 
Retransmission in various cases of failure-action taken on re-transmitted packets when the ICAP response is not 
received for the original request and the retransmitted request comes in: 
 
 
WSP CO: 
 
Permit: The uplink packet is sent for ICAP rating and depending on the ICAP response the WTP 
transaction is allowed/blocked. It is possible that the WAP gateway sends the response for the 
permitted GET request. Hence, there is a race condition and the subscriber may be able to view the 
web page even thought the rating was redirect or content insert. 
 
Content Insert: The retransmitted packet is not sent for ICAP rating. 
 
Redirect: The retransmitted packet is not sent for ICAP rating. 
 
Discard: The uplink packet is sent for ICAP rating and depending on the ICAP response the WTP 
transaction is allowed/blocked. 
 
Terminate flow: The uplink packet is sent for ICAP rating and depending on the ICAP response the 
WTP transaction is allowed or blocked. The WAP gateway may send an Abort transaction for this