Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Traffic Policing and Shaping
▀ Traffic Shaping Configuration
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22983-01
Traffic Shaping Configuration
Traffic Shaping is configured on a per-subscriber basis. The subscribers can either be locally configured subscribers on
the system or subscriber profiles configured on a remote RADIUS server.
the system or subscriber profiles configured on a remote RADIUS server.
In 3GPP service Traffic policing can be configured for subscribers through APN configuration as well.
Important:
In 3GPP, service attributes received from the RADIUS server supersede the settings in the APN.
Important:
Commands used in the configuration samples in this section provide base functionality to the extent
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
Configuring Subscribers for Traffic Shaping
This section provides information and instructions for configuring local subscriber profiles on the system to support
Traffic Shaping.
Traffic Shaping.
Important:
Instructions for configuring RADIUS-based subscriber profiles are not provided in this document.
Please refer to the documentation supplied with your server for further information.
Step 1
Set parameters by applying the following example configurations:
Step a
To apply the specified limits and actions to the downlink (data to the subscriber):
Step b
To apply the specified limits and actions to the uplink (data to the subscriber):