Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
GGSN Service Configuration Procedures
FA Services Configuration ▀
Cisco ASR 5000 Series Gateway GPRS Support Node Administration Guide ▄
OL-22944-01
Notes:
<
> is name of the context to use for FA service configuraiton. Generally FA should be
configured within a destination context.
<
> is name of the FA service where other parameters have to configure for FA functionality.
IP Interface and UDP Port Binding for Pi Interface
Use the following example to bind the FA service to an local IP interface and specify the maximum number of
subscribers that can access this service. Binding an interface to the FA service causes the interface to take on the
characteristics of a Pi interface.
subscribers that can access this service. Binding an interface to the FA service causes the interface to take on the
characteristics of a Pi interface.
Notes:
<
> is name of the FA service which is created to configure FA functionality.
<
> is the local IP address in IPv4/IPv6 notation for providing Pi interfae characteristics.
<
> is the maximum number of subscribers that can access this service on this interface. This can be
configured to any integer value from 0 to 500,000. The default is 500,000.
I
MPORTANT
:
The maximum number of subscribers supported is dependant on the session
capacity license installed and the number of active PACs/PSCs installed in the system. For more
information on session capacity license, refer to the Software Management Operations chapter of the
System Administration Guide.
information on session capacity license, refer to the Software Management Operations chapter of the
System Administration Guide.
<
> is the UDP port number from 1 through 65535 to be used for Pi interface. Default port
number is 434.
For more information on commands/keywords that configure additional parameters and options, refer FA Service
Configuration Mode Commands chapter of Command Line Interface Reference.
Security Parameter Index (SPI) Configuration
Use the following example to configure the security parameter index (SPI) between FA service and HA: