Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
NAT Configuration
▀ Configuring NAT
▄ Cisco ASR 5000 Series Network Address Translation Administration Guide
OL-22992-01
Configuring NAT Backout for APN
To configure a secondary IP pool that is not overwritten by the RADIUS supplied list, use the following configuration.
The secondary pool configured will be appended to the RADIUS supplied IP pool list / APN provided IP pool list
whichever is applicable during call setup.
The secondary pool configured will be appended to the RADIUS supplied IP pool list / APN provided IP pool list
whichever is applicable during call setup.
Important:
This configuration is only applicable to UMTS networks.
Notes:
The
command is license dependent.
The
command must be configured in the destination
context. This command makes addresses from the specified IP pool in the current context unavailable once
they are free.
they are free.
Configuring NAT Backout for Subscribers
To configure a secondary IP pool that is not overwritten by the RADIUS supplied list, use the following configuration.
The secondary pool configured will be appended to the RADIUS supplied IP pool list/subscriber template provided IP
pool list whichever is applicable during call setup.
The secondary pool configured will be appended to the RADIUS supplied IP pool list/subscriber template provided IP
pool list whichever is applicable during call setup.