Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
PDN Gateway Configuration
▀ Configuring the System as a Standalone eGTP P-GW
▄ Cisco ASR 5000 Series Packet Data Network Gateway Administration Guide
OL-22985-01
Notes:
The
command under
can also specify an IPv4 address to the PCRF.
The Gx interface IP address can also be specified as an IPv4 address using the
command.
The Gy interface IP address can also be specified as an IPv4 address using the
command.
The Rf interface IP address can also be specified as an IPv6 address using the
command.
Configuring QCI-QoS Mapping
Use the following example to create and map QCI values to enforceable QoS parameters:
Notes:
QCI values 1 through 9 are standard values and are defined in 3GPP TS 23.203. Values 10 through 32 can be
configured for non-standard use.
The above configuration only shows one keyword example. Refer to the QCI - QOS Mapping Configuration
Mode Commands chapter in the Command Line Interface Reference for more information on the
command and other supported keywords.