Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Peer-to-Peer Detection Configuration
▀ Gathering P2P Statistics
▄ Cisco ASR 5000 Series Peer-to-Peer Detection Administration Guide
OL-22960-01
Gathering P2P Statistics
In the following table, the first column lists what statistics to gather, the second column lists an action to perform, and
the third column describes what information is displayed or what information to look for in the resulting output.
the third column describes what information is displayed or what information to look for in the resulting output.
Table 1. Gathering Statistics
Statistics Wanted
Action to Perform
Information to Look For
Analyzer
statistics
statistics
At the Exec Mode prompt, enter the following
command:
command:
The output of this command displays the analyzer
statistics if a P2P analyzer is used. Since the
analyzer statistics are not bound to any service, the
traffic information per gateway can be obtained.
statistics if a P2P analyzer is used. Since the
analyzer statistics are not bound to any service, the
traffic information per gateway can be obtained.
Ruledef statistics
At the Exec Mode prompt, enter the following
command:
command:
The output of this command displays the Ruledef
statistics including the packet count, byte count
and hits.
statistics including the packet count, byte count
and hits.
P2P flow
statistics
statistics
At the Exec Mode prompt, enter the following
command:
command:
The output of this command displays the number
of P2P voice and non-voice flows.
of P2P voice and non-voice flows.
Charging Action
information
information
At the Exec Mode prompt, enter the following
command:
command:
The output of this command displays the charging
action information and corresponding statistics
configured in the active charging service.
action information and corresponding statistics
configured in the active charging service.
Transmit and
Receive data
Receive data
At the Exec Mode prompt, enter the following
command:
command:
The output of the command displays the
information for sessions that have received or
transmitted data which matches the criteria.
information for sessions that have received or
transmitted data which matches the criteria.
Sessions using
specific protocol
specific protocol
At the Exec Mode prompt, enter the following
command:
command:
The output of this command displays information
for the sessions using the specified protocol.
for the sessions using the specified protocol.
Total and current
P2P and P2P
voice flows
P2P and P2P
voice flows
At the Exec Mode prompt, enter the following
command:
command:
The output of this command displays total and
current P2P flow and P2P voice flow statistics, and
total number of subscribers.
current P2P flow and P2P voice flow statistics, and
total number of subscribers.
Dynamic
signature files
information
signature files
information
At the Exec Mode prompt, enter the following
command:
command:
The output of this command displays P2P dynamic
signature file information.
signature file information.
Voice Statistics
At the Exec Mode prompt, enter the following
command:
command:
The output of this command displays the voice and
non-voice analyzer statistics for voice supported
protocols (MSN, Yahoo, GTalk, Skype, Oscar).
non-voice analyzer statistics for voice supported
protocols (MSN, Yahoo, GTalk, Skype, Oscar).
The P2P analyzer tracks all P2P protocols for both uplink and downlink packets and bytes statistics. For additional
statistics, refer to the Gathering P2P Statistics section in the P2P Service Configuration chapter of the Peer-to-Peer
Detection Administration Guide.
statistics, refer to the Gathering P2P Statistics section in the P2P Service Configuration chapter of the Peer-to-Peer
Detection Administration Guide.