Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Configuring Management Settings
Configuring Client and Port Parameters ▀
Cisco ASR 5000 Series System Administration Guide ▄
OL-22969-02
Configuring Client and Port Parameters
Use the following example to set client ID parameters and configure the SIOP/TCP port settings:
Notes:
You can issue the client id command multiple times to configure multiple clients.
If a client ID is de-activated due to reaching the configured maximum number of attempts, use the
command to reactivate it.
If a firewall exists between the system and the Web Element Manager, open the SIOP port number and the TCP
port number 15011.
If the ORB Notification Service is enabled (event-notif-service), you can configure filters to determine which
events are to be sent. By default, the Service sends all error and higher level events, ―info‖ level events for the
ORBS facility, CLI command logs, and license change logs. Optionally, configure a filter by including the
ORBS facility, CLI command logs, and license change logs. Optionally, configure a filter by including the
command. Enter this command for each filter you need to configure.