Cisco Cisco Aironet 1400 Wireless Bridge Notas de publicación

CSCsb04925—Bridge displays junk characters when show controllers command is issued.

When show controllers dot110 is entered, it displays a serial number with a junk character.

If you need information about a specific caveat that does not appear in these release notes, you can use 
the Cisco Bug Toolkit to find select caveats of any severity. Click this URL to browse to the Bug Toolkit:

(If you request a defect that cannot be displayed, the defect number might not exist, the defect might not 
yet have a customer-visible description, or the defect might be marked Cisco Confidential.)

For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at 

. Click Technology Support, choose Wireless from the menu on the left, and 

click Wireless LAN.

The Cisco Aironet 1400 Series Wireless Bridge Mounting Instructions provides detailed instructions for 
installing and mounting the bridge.

The separation distance between the two stacked bridge antennas is a minimum of 6.56 ft (2 m).

The Quick Start Guide: Cisco Aironet 1400 Series Wireless Bridge states on page 6 that the external 
antenna version of the bridge connects to an optional antenna. The statement is incorrect. The external 
antenna of the bridge has no installed antenna. The customer must purchase the antenna for the this 
version. There are three antenna options available for the external antenna version and the customer must 
purchase at least one to make the bridge operational. 

A revision to this guide will be released at a future date.

These documents describe the installation and configuration of the bridge: