Cisco Cisco Aironet 1400 Wireless Bridge Notas de publicación

Descargar
Página de 9
 
7
Release Notes for Cisco Aironet 1410 Bridges for Cisco IOS Release 12.2(13)JA4
OL-5848-02
Troubleshooting
sessions that are only passing through the device (for example, transit traffic that is being routed by 
a router). In addition, this attack vector does not directly compromise data integrity or 
confidentiality. 
All Cisco products which contain TCP stack are susceptible to this vulnerability. 
This advisory is available at 
 
and it describes this vulnerability as it applies to Cisco products that run Cisco IOS® software. 
A companion advisory that describes this vulnerability for products that do not run Cisco IOS 
software is available at 
CSCdz32659—Memory allocation failure (MALLOCFAIL) messages no longer occur for Cisco 
Discovery Protocol (CDP) processes.
CSCed40563—Problems with the CDP protocol have been resolved.
These caveats are resolved in Cisco IOS Release 12.2(13)JA, 12.2(13)JA1, and 12.2(13)JA2:
CSCea28990—The bridge now passes IP traffic when the bridge # route IP command is configured. 
CSCea57649—The CLI Help command no longer produces incorrect output for the radio interface. 
CSCea77473—HTTP software upgrade no longer fails with Netscape version 7.x.
CSCea81730—The web interface for the non-root bridge now correctly displays the root-bridge MAC 
address on the radio page.
CSCeb05835— The web interface no longer shows incorrect STP Root information on a bridge 
setup with multiple VLANs.
CSCeb12740—The virtual radio connection can now be made after the station role is changed.
CSCeb15923—Radio firmware recovery now works reliably.
CSCeb17296—The clear dot client command now works with traffic being passed.
CSCed21588—Bridges no longer disassociate bridges when WEP is enabled.
Troubleshooting
For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at 
. Click Technology Support, select Wireless from 
the menu on the left, and click Wireless LAN.
Documentation Updates
The Cisco Aironet 1400 Series Wireless Bridge Mounting Instructions provides detailed instructions for 
installing and mounting the bridge.
Stacking Bridges Section Changes
The separation distance between the two stacked bridge antennas is a minimum of 6.56 ft (2 m).