Cisco Cisco Aironet 1310 Access Point Bridge Notas de publicación

Descargar
Página de 15
 
12
Release Notes for Cisco Aironet 1300 Series Outdoor Access Point/Bridge for Cisco IOS Release 12.3(7)JA2
OL-8818-01
  Caveats
Caveats
This section lists open caveats for the access point/bridge.
Open Caveats
This caveat is open in Cisco IOS Release 12.3(7)JA, 12.3(7)JA1, and 12.3(7)JA2 for the access 
point/bridge:
CSCsb29038—A 1310 with integrated antenna shows diversity options on GUI.
The GUI shows the diversity options even though diversity is not supported on integrated antenna 
configurations. If the user configures diversity, an HTTP error 404 displays when attempting to 
apply the change.
Resolved Caveats in Cisco IOS Release 12.3(7)JA2
The following caveats are resolved in Cisco IOS Release 12.3(7)JA2
CSCej31994—Memory dump printed to console is now saved in crash-info log file.
CSCej32833—Process watchdog no longer causes crash caused by infinite loop.
CSCsb48036—Input queue drops on Radio0 interface with 7920 client are now within limits.
CSCsb60564—Access points running 12.3.4.JA no longer crashes with memory corruption & 
creates an rcore.
CSCsb84111—AP1200 Memory leak no longer occurs in dot11_mgmt_rsnie_accept.
CSCsb90645—Access point no longer locks up with 7920 phone.
CSCsc01606—Mobile node associations are now being properly cleared.
CSCsc01614—Memory corruption no longer occurs in 1200 series access points running Cisco IOS 
Release 12.3(7)JA.
CSCsc01706—WDS master/backup no longer hangs with Cisco IOS Release 12.3(7)JA.
CSCsc04430—Wireless IP phone associations can now be viewed using SNMP.
Resolved Caveats in 12.3(7)JA1
CSCej08390—Reboot loop with snmp-server ifindex persist configured no longer occurs.
CSCsb85705—RX byte counter per rate now increments correctly.
CSCsb49385—A roaming workgroup bridge no longer selects a non-optimal root access point.
CSCsb56012—Clients are now able to associate when WDS device is down.
CSCef77951—Excessive processor memory is no longer held by IRB/CRB rxtypes.
CSCee36192—The no snmp-server enable traps tty command is effective through reload.
CSCeg83274—Access point now sends RADIUS state information.