Cisco Cisco Aironet 1310 Access Point Bridge Notas de publicación

This section lists new features in Cisco IOS Release 12.2(15)JA for the 1310 access point/bridge.

The Cisco Aironet 1310 Outdoor Access Point/Bridge supports the same Cisco IOS Software access 
point features as Cisco Aironet 1100 Series Access Points in Cisco IOS Software Release 12.2(13)JA 
and earlier Cisco IOS Software releases with the exception of radio management aggregation, Wireless 
Domain Services (WDS), and IEEE 802.1X local authentication service. 

The 1310 access point/bridge supports the same Cisco IOS Software wireless bridge features as the 
Cisco Aironet 1400 Series Wireless Bridge in Cisco IOS Software Release 12.2(13)JA and earlier Cisco 
IOS Software releases with the exception of IEEE 802.11a.

The following new features are supported by the 1310 access point/bridge:

IEEE 802.11d World Mode Support

Cisco Compatible Extensions information element

IEEE 802.1X Support for EAP-FAST

Wi-Fi Protected Access (WPA)

Fast secure roaming non-root wireless bridge

Workgroup bridge (WGB) mode

To learn more about all the features supported by the 1310 access point/bridge, refer to the IOS Feature 
Navigator at the following link on Cisco.com:

The 802.11d standard for world mode is supported by Cisco Aironet access points and bridges in this 
release. World mode enables the 1310 access point/bridge to inform an 802.11d client device which radio 
setting the device should use to conform to local regulations. 

This information element allows a Cisco Aironet access point to inform Cisco Compatible Extensions 
client devices about the Cisco Compatible release version that it supports.

This Cisco Wireless Security Suite feature supports the IEEE 802.1X standard port-based authentication 
Extensible Authentication Protocol (EAP) type EAP-Flexible Authentication through Secure Tunneling 
(EAP-FAST). EAP-FAST can also be supported by access points running Cisco IOS Release 12.2(11)JA 
or later.