Cisco Cisco Aironet 1400 Wireless Bridge Notas de publicación
6
Release Notes for Cisco Aironet 1410 Bridges for Cisco IOS Release 12.3(7)JA2
OL-8747-01
Caveats
Caveats
This section lists open and resolved caveats for the bridge.
Open Caveats
These caveats are open in Cisco IOS Release 12.3(7)JA, 12.3(7)JA1, and 12.3(7)JA2:
•
CSCed36477—VLAN keyword with encryption command on bridges is limited.
Wireless bridges, such as the BR1410, do not support using different crypto settings on different
VLANs.
VLANs.
•
CSCed36462—Per-VLAN crypto settings are nonfunctional with wireless bridges.
On wireless bridges, all VLANs traversing the bridge link must use the same encryption settings. To
avoid confusion, do not use the “vlan <vlan-id> keyword on the encryption command as shown in
the following example:
avoid confusion, do not use the “vlan <vlan-id> keyword on the encryption command as shown in
the following example:
interface dot11radio0
encryption key 1 size 128bit AAAAABBBBBCCCCCDDDDDEEEEEF transmit-key
encryption mode wep mandatory mic
•
CSCsa68144—Default bridge configuration is invalid.
When a defaulted 1400 series bridge boots up, it displays an error that the RTS threshold contains
invalid input. The RTS threshold is set to 4000. Entering a ? after entering RTS threshold indicates
the maximum value is 4000 but a system error occurs when attempting to set it. The maximum value
that the CLI allows is 2347.
invalid input. The RTS threshold is set to 4000. Entering a ? after entering RTS threshold indicates
the maximum value is 4000 but a system error occurs when attempting to set it. The maximum value
that the CLI allows is 2347.
•
CSCsa68144—Default bridge configuration is invalid.
When a defaulted 1400 series bridge boots up, it displays an error that the RTS threshold contains
invalid input. The RTS threshold is set to 4000. Entering a ? after entering RTS threshold indicates
the maximum value is 4000 but a system error occurs when attempting to set it. The maximum value
that the CLI allows is 2347.
invalid input. The RTS threshold is set to 4000. Entering a ? after entering RTS threshold indicates
the maximum value is 4000 but a system error occurs when attempting to set it. The maximum value
that the CLI allows is 2347.
•
CSCsb04925—Bridge displays junk characters when show controllers command is issued.
When show controllers dot110 is entered, it displays a serial number with a junk character.
Resolved Caveats in Cisco IOS Release 12.3(7)JA2
No caveats for the 1400 series bridge were resolved in Cisco IOS release 12.3(7)JA2.
Resolved Caveats in Cisco IOS Release 12.3(7)JA1
•
CSCej08390—Reboot loop with snmp-server ifindex persist configured no longer occurs.
•
CSCef83274—Bridge now sends RADIUS state information.
•
CSCef77951—Excessive processor memory is no longer held by IRB/CRB rxtypes.
•
CSCee36192—The no snmp-server enable traps tty command is effective through reload.