Cisco Cisco Aironet 1400 Wireless Bridge Notas de publicación

This section lists open and resolved caveats in Cisco IOS Release 12.3(2)JA for the bridge.

These caveats are open in Cisco IOS Release 12.3(2)JA for the bridge:

CSCec78900—High CPU use sometimes slows throughput on bridges.

CSCef96804—The RSSI DC output port gives an incorrect signal strength indication.

Workaround: When installing the bridge link, use the bridge LEDs for antenna alignment. If the 
bridges are already installed, use the dot11 d0 linktest target H.H.H privileged exec CLI command 
to start a link test between the root and non-root bridge and display the RSSI measurement.

These caveats are resolved in Cisco IOS Release 12.3(2)JA:

CSCec25430—Bridges no longer reload when they receive a corrupt CDP packet.

CSCed46039—After a reboot, the bridge’s CCA noise floor setting no longer changes from 62, 
which is the default setting, to 0.

CSCed68575—The SNMP process no longer triggers the bridge to reload its image.

CSCee23653—Administrative packets no longer cause the bridge link to fail.

CSCee26301—SSH now operates correctly when you change the bridge host name.

CSCee30632—Bridges now support SNTP.

CSCee45192—You can now enable both debugging notifications and Syslog messages on the bridge 
GUI.

CSCee51677—When you configure a time zone on the bridge GUI, the bridge configuration viewed 
on the CLI now matches the GUI setting.

CSCef46191—A specifically crafted TCP connection to a telnet or reverse telnet port of a bridge 
Cisco IOS software no longer blocks further telnet, reverse telnet, Remote Shell (RSH), Secure Shell 
(SSH), and HTTP access to the bridge.

For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at 

. Click Technology Support, choose Wireless 

from the menu on the left, and click Wireless LAN.