Cisco Cisco Aironet 1310 Access Point Bridge Notas de publicación

To meet regulatory restrictions, the external antenna configuration and the external antenna must be 
professionally installed.

When installing the dual-coax cable, it is acceptable to unzip or pull the two cables apart at the ends if 
more separation is needed between the male F connectors. 

Personnel installing the access point/bridge must understand wireless bridging techniques, antenna 
alignment and adjustment, and grounding methods. The integrated antenna configuration can be 
installed by an experienced IT professional.

This section describes important information about the access point.

When you open the 1310 interface, you must enter a username and password. The default username for 
administrator login is Cisco, and the default password is Cisco. Both the username and password are case 
sensitive.

The proxy Mobile-IP feature is not supported in Cisco IOS Release 12.3(2)JA5.

Cisco IOS Release 12.3(2)JA5 does not support this feature.

Ethernet port settings on the 1300 must be set to auto speed and auto negotiation. If you use any other 
setting, the GUI operates very slowly. For additional information, caveat CSCef45010 in the 

.

The new Express Security page in the 1310 web-browser interface makes it easier to create SSIDs and 
assign security settings to them. 

 shows the Express Security page.

Limitations of the Express Security page include:

You cannot edit SSIDs. However, you can delete SSIDs and re-create them.