Cisco Cisco Aironet 1310 Access Point Bridge Notas de publicación

CSCsa61263—Client devices assigned to a non-native VLAN and connected to a workgroup bridge 
no longer lose their network connection when the workgroup bridge roams from one root device to 
another.

CSCsa64627—STP now functions properly when the native VLAN is not VLAN 1.

If you need information about a specific caveat that does not appear in these release notes, you can use 
the Cisco Bug Toolkit to find caveats of any severity. Click this URL to browse to the Bug Toolkit:

(If you request a defect that cannot be displayed, the defect number might not exist, the defect might not 
yet have a customer-visible description, or the defect might be marked Cisco Confidential.) 

For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at 

. Click Technology Support, choose Wireless 

from the menu on the left, and click Wireless LAN.

This section lists changes, errors, and omissions from user documentation for access points.

Access point/bridge quick start guides do not yet describe these features:

Changes to the default configuration—In the default configuration for this release, there is no 
default SSID and the radio interface is disabled by default. You must create an SSID and enable the 
radio interface before the unit allows wireless associations from other devices.

Default IP address behavior—When an unconfigured access point/bridge boots, it attempts to obtain 
an IP address from a DHCP server. If it fails to locate a DHCP server, it continues attempting to 
request an IP address from the DHCP server. To eliminate this behavior, you must access the access 
point/bridge through its console port and assign a static IP address.

This section lists documents related to Cisco IOS Release 12.3(4)JA1 and to access points/bridges.

These documents describe installation and configuration of the 1300 series: