Cisco Cisco Aironet 1310 Access Point Bridge Notas de publicación
2
Release Notes for Cisco Aironet Access Points for Cisco IOS Release 12.3(11)JA4
OL-14258-01
Introduction
Introduction
The Cisco Aironet Access Point is a wireless LAN transceiver that acts as the connection point between
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points enables wireless users to
move freely throughout the facility while maintaining uninterrupted access to the network.
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points enables wireless users to
move freely throughout the facility while maintaining uninterrupted access to the network.
You can configure and monitor 1130, 1240, and the 1300 series outdoor access point/bridge using the
command-line interface (CLI), the web-browser interface, or Simple Network Management Protocol
(SNMP).
command-line interface (CLI), the web-browser interface, or Simple Network Management Protocol
(SNMP).
System Requirements
You can install Cisco IOS Release 12.3(11)JA4 on all 1130, 1240 series access points, and 1300 series
outdoor access point/bridges.
outdoor access point/bridges.
Finding the IOS Software Version
To find the version of IOS software running on your access point, use a Telnet session to log into the
access point and enter the show version EXEC command. This example shows command output from
an access point running Cisco IOS Release 12.3(11)JA4:
access point and enter the show version EXEC command. This example shows command output from
an access point running Cisco IOS Release 12.3(11)JA4:
ap1240AG>show version
Cisco Internetwork Operating System Software
IOS (tm) C1240 Software (C1240-K9W7-M), Version 12.3(11)JA4
Copyright (c) 1986-2006 by Cisco Systems, Inc.
On access points running IOS software, you can also find the software version on the System Software
Version page in the access point’s web-browser interface. If your access point does not run IOS software,
the software version appears at the top left of most pages in the web-browser interface.
Version page in the access point’s web-browser interface. If your access point does not run IOS software,
the software version appears at the top left of most pages in the web-browser interface.
Obtaining the Software Image
To obtain the Cisco IOS software for your access point, follow these instructions to reach the Cisco IOS
Software Center on Cisco.com:
Software Center on Cisco.com:
Step 1
Follow this link to the Cisco Software Center page:
Step 2
Scroll down to the Access Point section.
Step 3
Choose your access point from the displayed list. The access point introduction page appears.
Step 4
Click Download Software. The Software Download page appears.
Step 5
Click your highlighted access point and the software type page appears.
Note
You must register or be a registered user to obtain the software image. Follow the registration
instructions.
instructions.
Step 6
Click IOS Software and the software release page appears.