Cisco Cisco Aironet 1310 Access Point Bridge Notas de publicación

This feature supports an 802.1X supplicant for EAP-TLS that provides a secure method for enabling 
802.1X authentication on the switch ports that are connected to access points. This authentication type 
uses a dynamic session-based WEP key derived from the client adapter and RADIUS server to encrypt 
data. It uses a client certificate for authentication. 

RADIUS servers that support EAP-TLS include Cisco Secure ACS release 3.0 or later and Cisco Access 
Registrar release 1.8 or later. 

Detailed information and configuration procedures are in Chapter 11 of the Cisco IOS Software 
Configuration Guide for Cisco Aironet Access Points, 12.4(3g)JA & 12.3(8)JEB, which is available on 
Cisco.com at the following URL:

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43auth.html

This section contains information that you should keep in mind when installing 1130, 1240 series access 
points, 1300 series outdoor access point/bridges, and 1400 series bridges.

This section contains installation notes for access points.

Cisco Aironet 1130 and 1240 Series Access Points provide adequate fire resistance and low 
smoke-producing characteristics suitable for operation in a building's environmental air space, such as 
above suspended ceilings, in accordance with Section 300-22(C) of the National Electrical Code (NEC) 
and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, C22.1.

The power injector does not provide fire resistance and low smoke-producing characteristics and is not 
intended for use in extremely high or low temperatures or in environmental air spaces such as above 
suspended ceilings.

This section describes issues that you should consider before applying power to an access point.

Cisco Aironet power injectors are designed only for use with Cisco Aironet access points and bridges. 
Do not use the power injector with any other Ethernet-ready device. Using the power injector with other 
Ethernet-ready devices can damage the equipment.