Cisco Cisco Aironet 350 Access Points Notas de publicación
7
EAP Authentication Requires Matching 802.1x Protocol Drafts
OL-2434-01
Limitations and Restrictions
Note
Draft standard 8 is the default setting in firmware version 11.05 and earlier, and it might remain in
effect when you upgrade the firmware to version 11.06 or later. Check the setting on the
Authenticator Configuration page in the management system to make sure the best draft standard for
your network is selected.
effect when you upgrade the firmware to version 11.06 or later. Check the setting on the
Authenticator Configuration page in the management system to make sure the best draft standard for
your network is selected.
Use the Authenticator Configuration page in firmware version 11.06 or later to select the draft of the
802.1x protocol the access point or bridge radio should use. Follow these steps to set the draft for your
access point or bridge:
802.1x protocol the access point or bridge radio should use. Follow these steps to set the draft for your
access point or bridge:
Step 1
Browse to the Authenticator Configuration page in the access point management system:
a.
On the Summary Status page, click Setup.
b.
On the Setup page, click Security.
c.
On the Security Setup page, click Authentication Server.
Step 2
Use the 802.1x Protocol Version (for EAP authentication) pull-down menu to select the draft of the
802.1x protocol the access point or bridge radio should use. Menu options include:
802.1x protocol the access point or bridge radio should use. Menu options include:
•
Draft 7—No radio firmware versions compliant with Draft 7 have LEAP capability, so you
should not need to select this setting.
should not need to select this setting.
•
Draft 8—Select this option if LEAP-enabled client devices that associate with this access point
or bridge use radio firmware versions 4.13, 4.16, or 4.23.
or bridge use radio firmware versions 4.13, 4.16, or 4.23.
Table 1
802.1x Protocol Drafts and Compliant Client Firmware
Firmware Version
Draft 7
Draft 8
Draft 10
1
1.
The functionality in Draft 10 is equivalent to the functionality in Draft 11, the
ratified draft of the 802.1x standard.
ratified draft of the 802.1x standard.
PC/PCI cards 4.13
—
x
—
PC/PCI cards 4.16
—
x
—
PC/PCI cards 4.23
—
x
—
PC/PCI cards 4.25 and later
—
—
x
WGB34x/352 8.58
—
x
—
WGB34x/352 8.61 or later
—
—
x
AP34x/35x 11.05 and earlier
—
x
—
AP34x/35x 11.06 and later
2
2.
The default draft setting in access point and bridge firmware version 11.06 and
later is Draft 10.
later is Draft 10.
—
x
x
AP34x/35x 11.07 and later
—
x
x
AP34x/35x and BR35x 11.21
—
x
x