Cisco Cisco Aironet 350 Wireless Bridge Guía Para Resolver Problemas

Firmware versions 11.06 and later on the AP conform to IEEE 802.1X Draft 10 standards. The Draft 8
standard was used prior to this release. Firmware version 4.25 on the clients conforms to Draft 10. On an AP
that runs firmware 11.06, you can use either draft. If you want clients that run firmware 4.23 and earlier to
associate, use Draft 8. A 4.25 client does not work with an 11.06 AP that uses the Draft 8 configuration, and a
4.25 client does not work with an 11.05 AP.

11.06 (and later)

4.25

10

4.23 or earlier

8

11.03−−11.05

4.25 (does not
work with 11.05)

AP requires 8, but
client does not work
with 8

4.23 or earlier

8

There are two options to solve this problem:

Use Draft 10 (11.06) on the AP and upgrade the firmware of the client cards to 4.25.

1. 

Use Draft 8 on the AP and use the AP with earlier firmware on the clients.

2. 

This table shows the IEEE 802.1X Draft Standards to which the different versions of the Client Adapter
firmware (and Workgroup Bridge firmware) conform.

4.13

x

−

4.16

x

−

4.23

x

−

4.25 or later

−

x

WGB340/350 8.58

x

−

WGB340/350 8.61

−

x

MAC Authentication with RADIUS Server is used. A few of the Aironet 1231G APs (APs from Cisco IOS®
Release 12.3(7)JA1 to 12.3(7)JA3,) are having problems for user authentication.

This is a common problem if you upgrade from a later version of Cisco IOS to 12.3(7)JA3.

The first step to solve this problem is to test with configuration. Complete these steps: