Cisco Cisco Aironet 350 Wireless Bridge Manual Técnica
The Power Injector
The power injector for the BR1300 connects to the main bridge unit with a pair of coaxial cables. These
cables carry power and an Ethernet signal. This is significant because the power injector contains a switch that
is not configurable. Port 0 on this switch connects to FastEthernet 0 on the bridge. Port 1 provides
connectivity to the outside network through the RJ45 jack. The settings on this switch are for auto speed and
auto−duplex. The duplex setting means that external devices are set to either auto− or half−duplex. Do not
configure the external device for full−duplex because this results in a duplex mismatch. You can issue the
show power injector command to see the statistics on the power injector switch.
cables carry power and an Ethernet signal. This is significant because the power injector contains a switch that
is not configurable. Port 0 on this switch connects to FastEthernet 0 on the bridge. Port 1 provides
connectivity to the outside network through the RJ45 jack. The settings on this switch are for auto speed and
auto−duplex. The duplex setting means that external devices are set to either auto− or half−duplex. Do not
configure the external device for full−duplex because this results in a duplex mismatch. You can issue the
show power injector command to see the statistics on the power injector switch.
Online Help for IOS Bridges and IOS Access Points
Refer to Online Help for IOS Bridges and IOS Access Points for additional information.
Conclusion
Contact Cisco Technical Support for additional assistance to troubleshoot bridge issues. Include this
information in your online service request, or have it available when you call:
information in your online service request, or have it available when you call:
Serial number of each device involved
•
Model number of each device involved
•
Firmware versions of each device involved
•
Brief description of the topology of your wireless LAN
•
Related Information
Release Notes for Cisco Aironet 1410 Wireless Bridges for Cisco IOS Release 12.3
•
Debug Authentications
•
Upgrading to a New Software Release
•
Error Statistics on the Cisco Aironet 340 Series Bridge
•
Troubleshooting TechNotes − Cisco Aironet 350 Series
•
Cisco IOS Software Configuration Guide for Cisco Aironet 1300 Series Outdoor Access
Point/Bridge
Point/Bridge
•
Cisco Aironet 1400 Series Bridge Software Configuration Guide
•
Technical Support & Documentation − Cisco Systems
•
Contacts & Feedback | Help | Site Map
© 2013 − 2014 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of
Cisco Systems, Inc.
© 2013 − 2014 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of
Cisco Systems, Inc.
Updated: Oct 19, 2009
Document ID: 22950