Cisco Cisco Aironet 1524 Lightweight Outdoor Mesh Access Point Guía De Instalación
8
OL-19762-01
Cisco Aironet 1524SB Outdoor Mesh Access Point Hardware Addendum
Additional Documentation
The following documentation will help you install and configure the access point in your mesh network:
•
Getting Started Guide: Cisco Aironet 1520 Series Outdoor Mesh Access Points
•
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
•
Cisco Aironet 1520 Series Outdoor Mesh Access Point Mounting Instructions
•
Channels and Maximum Power Settings for Cisco Aironet Lightweight Access Points
•
Cisco Aironet 1520 Series Outdoor Mesh Access Point Power Injector Installation Instructions
•
AC Power Cords for Cisco Aironet 1520 Series Outdoor Mesh Access Points
•
Translated Safety Warnings for Cisco Aironet 1520 Series Access Points
•
Enterprise Mobility Design Guide
•
Mobile Access Router and Mesh Networks Design Guide
•
Secure Wireless Design Guide
•
CSA for WLAN Security
•
Ethernet Bridging in Point-to-Point Wireless Mesh Network Configuration Example
•
Cisco Wireless Control System Configuration Guide, Release 5.0
•
Troubleshooting a Mesh Network
These documents are available on cisco.com. Follow these steps to download them:
Step 1
Browse to http://www.cisco.com
Step 2
Click Products and Services. A drop-down window appears. Click Wireless. The Wireless Introduction
page appears.
page appears.
Step 3
Scroll down and click the Outdoor Wireless link under the Network Solutions heading (center).
Step 4
Click Cisco Aironet 1520 Series under the Related Products heading (center). The Cisco Aironet 1520
Series Introduction page appears.
Series Introduction page appears.
Step 5
In the Support window, select the All support information for Cisco Aironet 1520 Series link. The
Cisco Aironet 1520 Series Support page appears.
Cisco Aironet 1520 Series Support page appears.
Step 6
Select the category of the documentation you wish to download.
Step 7
Download the document.
Before Beginning the Installation
Before you begin the installation process:
•
Ensure that a site survey has been performed.
•
Ensure that your network infrastructure devices are operational and properly configured.
•
Ensure that your controllers are connected to switch trunk ports.
•
Ensure that your switch is configured with untagged access ports for connecting your access points.