Cisco Cisco Identity Services Engine Software Manual Técnica

To verify the scanner is connected you can navigate to Scans > Appliances.

Green connected sign on the left indicates that scanner is ready, you can also see LAN IP, WAN
IP, version of Scanner and Signatures.

Though you have configured Qualys Scanner and Cloud, you still have to tune Cloud settings to
make sure integration with ISE works fine. Note, it should be done before you configure adapter
through GUI, as the knowledgebase containing CVSS scoring is downloaded after the adapter is
configured for the first time.

Enable CVSS Scoring at Vulnerability Management > Reports > Setup > CVSS > Enable
CVSS Scoring

●