Cisco Cisco Identity Services Engine Software Manual Técnica
Cisco Identity Service Engine 2.0
●
Cisco ASA Software Release 9.5(1)
●
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
Refer to
Configure
The aim of the configuration is to:
Authenticate ssh user via Internal Identity Store
●
Authorize ssh user so it will be placed into privileged EXEC mode after the login
●
Check and send every executed command to ISE for verification
●
Network Diagram
Configurations
Configure ISE for Authentication and Authorization
Two users are created. User administrator is a part of Network Admins local Identity Group on
ISE. This user has full CLI privileges. User user is a part of Network Maintenance Team local
Identity Group on ISE. This user is allowed to do only show commands and ping.
ISE. This user has full CLI privileges. User user is a part of Network Maintenance Team local
Identity Group on ISE. This user is allowed to do only show commands and ping.