Cisco Cisco Identity Services Engine 1.2 Prospecto
Cisco Systems © 2015
25 페이지
보안
액세스 방법 가이드
localhost login: setup
Press 'Ctrl-C' to abort setup
Enter hostname[]: ise
Enter IP address[]: 10.1.100.22
Enter IP default netmask[]: 255.255.255.0
Enter IP default gateway[]: 10.1.100.1
Enter default DNS domain[]: yourdomain.com
Enter primary nameserver[]: 172.16.168.183
Add/Edit another nameserver? Y/N : n
Enter primary NTP server[time.nist.gov]:
Add/Edit secondary NTP server? Y/N : n
Enter system timezone[UTC] :
Enter username[admin]:
Enter password:
Enter password again:
Bringing up network interface...
Pinging the gateway...
Pinging the primary nameserver...
Do not use 'Ctrl-C' from this point on...
Appliance is configured
설치에
참조하십시오
.
ISE 패치 설치
설정을
마치고 ISE 가상 머신이 시작하여 실행 중이면 이 지침에 따라 시스템에 최신 패치를 설치합니다.
1단계
ISE Admin UI(
에
로그인합니다.
2단계
Administration > System > Maintenance > Patch Management > Install로 이동합니다.
3단계
Browse를 클릭하고 Cisco.com에서 다운로드한 패치를 선택합니다.
4단계
Install을 클릭하여 패치를 설치합니다.
패치가
기본 관리 노드에 설치된 경우 Cisco ISE에서 사용자를 로그아웃하며, 몇 분 후에 다시 로그인해야
합니다
.
참고
: 패치 설치가 진행 중일 때 Patch Management 페이지에서 액세스할 수 있는 기능은
Show Node
Status뿐입니다.
5단계
Administration > System > Maintenance > Patch Management로 이동하여 Patch Installation 페이지로
돌아갑니다
돌아갑니다
.