Cisco Cisco Identity Services Engine 2.1 Manual Técnica
The WLC is configured for Device Sensor, it collects network information from connected
endpoints through protocols such as HTTP and DHCP, and forwards this information to the ISE
Policy Services Node (PSN) in RADIUS accounting packets. When ISE receives a hostname, it
fetches the AD attributes for a new endpoint. The hostname is typically learned from the DHCP or
DNS probes.
endpoints through protocols such as HTTP and DHCP, and forwards this information to the ISE
Policy Services Node (PSN) in RADIUS accounting packets. When ISE receives a hostname, it
fetches the AD attributes for a new endpoint. The hostname is typically learned from the DHCP or
DNS probes.
Configure ISE
Step 1. Add Network Access Device
Add the WLC as a network device in Administration > Network Resources > Network Devices.
Use the Radius server key from the WLC as shared secret Authentication Setting.
Use the Radius server key from the WLC as shared secret Authentication Setting.
Step 2. Enable Radius and AD Probes
Enable Radius probe on the profiling node in Administration > System > Deployment > ISE
node > Profiling Configuration. Only two probes are actually used in this scenario, Radius
node > Profiling Configuration. Only two probes are actually used in this scenario, Radius