Cisco Cisco MGX 8220 Edge Concentrator Manual Técnica
Sample Configuration Template
Document ID: 10723
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Configuring the MGX 8220 Shelf
Configuring the LS1010
Prerequisites
Requirements
Components Used
Conventions
Configuring the MGX 8220 Shelf
Configuring the LS1010
Configuring the ATM−Attached Router (Cisco 4700)
Configuring the Frame Relay−Attached Router (Cisco 7507)
Verify
Troubleshoot
Related Information
Configuring the Frame Relay−Attached Router (Cisco 7507)
Verify
Troubleshoot
Related Information
Introduction
This document describes a sample scenario for connecting a Cisco MGX 8220 shelf to a LightStream 1010
(LS1010) using an ATM User−Network Interface (UNI) connection. In this example, we are using Frame
Relay−ATM Software Interworking between Cisco routers as the end devices. This can be used as a general
reference for interconnecting other end devices between an MGX 8220 shelf and an LS1010. For more detail
on the commands used in this example, please see the command reference for the respective product.
(LS1010) using an ATM User−Network Interface (UNI) connection. In this example, we are using Frame
Relay−ATM Software Interworking between Cisco routers as the end devices. This can be used as a general
reference for interconnecting other end devices between an MGX 8220 shelf and an LS1010. For more detail
on the commands used in this example, please see the command reference for the respective product.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.