Cisco Cisco Aironet 1572EC Outdoor Access Point Hoja De Datos
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 17
Note 2: For the USA only, you must use regulatory domain - B instead of the traditional - A. This is due to the recent FCC rule
changes that opened up the 5 GHz UNII-1 band for outdoor usage.
changes that opened up the 5 GHz UNII-1 band for outdoor usage.
Use Table 2 and the remainder of this guide to identify the items that you need for your deployment. Note that
some components are available as a “configurable” option or as a “spare.”
some components are available as a “configurable” option or as a “spare.”
●
A “configurable” option ships in the same main box as the AP. For example:
AIR-ACCPMK1570-
1 is a “configurable” option and, if so ordered, is shipped alongside the AP in the same
box.
●
A “spare” option is denoted with an equals (=) sign at the end of the part number. For example:
AIR-ACCPMK1570-
1= is a “spare” and, if so ordered, is shipped in separate packaging.
If making a return or trade-in, you might need to remove any option you installed before returning your access point
to Cisco. Consult your Cisco representative for additional assistance in ordering mesh and other networking
equipment.
Table 3 lists the standard items that could be included with each specific model.
Table 3.
Standard Items Included with Each Specific Model
AP1572EAC
AP1572IC
AP1572EC
● Access point
● Sealant tape for the antenna connections
● Fitting dome/gland: liquid-tight adapter for
● Sealant tape for the antenna connections
● Fitting dome/gland: liquid-tight adapter for
sealing the cable ingress connection
● Grounding lug
● Antiseizing compound for the mounting brackets
● DC power connector
● Antiseizing compound for the mounting brackets
● DC power connector
● Access point
● Grounding lug
● Antiseizing compound for the
● Grounding lug
● Antiseizing compound for the
mounting brackets
● Access point
● Sealant tape for the antenna connections
● Fitting dome/gland: liquid-tight adapter for
● Sealant tape for the antenna connections
● Fitting dome/gland: liquid-tight adapter for
sealing the cable ingress connection
● Grounding lug
● Antiseizing compound for the mounting brackets
● Antiseizing compound for the mounting brackets
3. Cisco Software Subscription
Cable Modem License
The cable modem (CM) license applies only to the two Aironet 1570 Series models that have built-in cable
modems, the AP1572IC and AP1572EC. These two AP models come with CM hardware capable of operating with
up to 24x8 channel bonding on the downstream (DS) and upstream (US), respectively. However, there is a right-to-
use (RTU) license (see Table 4) that must be selected in association with this hardware for the user to have the
right to operate these AP models. At a minimum, license option LIC-CM1570-08CH shall be selected in association
with AP1572IC and AP1572EC, even if the operator chooses not to use the CM. The RTU authorizes the user to
operate the CM hardware with up to 8, 16, or 24 bonded channels on the downstream. This RTU can be selected
as a “configurable” option at the time of the AP order, or as a “spare” at a later date. Note, however, that there is no
as a “configurable” option at the time of the AP order, or as a “spare” at a later date. Note, however, that there is no
CM RTU upgrade part number available for this RTU license, and thus the user may want to consider purchasing a
16- or 24-channel license at the time of ordering if planning to upgrade the CM operation at a later time.
Table 4.
Cisco Aironet 1572IC and 1572EC Cable Modem RTU Software License
Part Number
Description
LIC-CM1570-08CH
License: Cable Modem (RTU), up to 8 Downstream Channel Bonding
LIC-CM1570-16CH
License: Cable Modem (RTU), up to 16 Downstream Channel Bonding
LIC-CM1570-24CH
License: Cable Modem (RTU), up to 24 Downstream Channel Bonding