Cisco Cisco Aironet 1572EC Outdoor Access Point Hoja De Datos
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 17
Figure 2. Fitting the Fiber Cable Interface to the AP
Accessory Kit and Optional Items
RF Cables and Lightning Arrestors
For customer convenience, Cisco offers RF cables to remotely attach external antennas to the Cisco Aironet
1572EAC and 1572EC access points. When you use cables between the antenna and these access points, Cisco
recommends that you add lightning arrestors to each port, particularly when the deployment is in an area with high
lightning activity. The lightning arrestor listed here, when properly grounded, provides robust protection against
induced currents in the RF cabling generated by nearby lightning strikes. The lightning arrestor does not protect
against direct lightning strikes on the access point. Table 14 lists and describes the RF cables and lightning
arrestor parts.
Table 14.
RF Cables and Lightning Arrestor
Part Number
Description
AIR-CAB005LL-N=
RF Cable, 5 ft Low-loss, N connectors
AIR-CAB010LL-N=
RF Cable, 10 ft Low-loss, N connectors
AIR-ACC245LA-N=
Accessory, 2.4 and 5 GHz lightning arrestor, N connector