Cisco Cisco AP541N Wireless Access Point Guía De Instalación
1
Cisco AP541N Ceiling Mount Installation Instructions
This document describes the use of the AP540N-CMK Ceiling Mount to
deploy the Cisco AP541N.
deploy the Cisco AP541N.
W
ARNING
Insecure mounting might damage the device or cause injury.
Cisco is not responsible for damages or injury incurred by
insecure wall-mounting or ceiling-mounting.
Cisco is not responsible for damages or injury incurred by
insecure wall-mounting or ceiling-mounting.
To install the ceiling mount onto the ceiling rail:
S
TEP
1
Spread the fixture so it fits over the flanges in the ceiling rail.
S
TEP
2
Compress the fixture to its original, closed position so that it grips
the ceiling rail.
the ceiling rail.
S
TEP
3
Use the thumbscrew, on the underside of the fixture, to lock the
fixture onto the ceiling rail.
fixture onto the ceiling rail.
S
TEP
4
Place the two lugs on the bracket into the holes in the bottom of the
access point with the bracket oriented as shown in the next figure.
access point with the bracket oriented as shown in the next figure.