Cisco Cisco Packet Data Gateway (PDG) Guía De Administador
Troubleshooting
▀ Detecting Faulty Hardware
▄ Cisco ASR 5000 System Administration Guide
212
Ethernet Line Card Interface Activity LED States
The Activity LEDs, associated with a particular network interface on the Ethernet line cards, indicate the presence of
traffic on the network link. These LEDs should be green when data is being transmitted or received over the interface.
traffic on the network link. These LEDs should be green when data is being transmitted or received over the interface.
The possible states for this LED are described in the following table. If the LED is not green, use the troubleshooting
information in the table to diagnose the problem.
information in the table to diagnose the problem.
Table 32.
Ethernet Line Card Interface Activity LED States
Color
Description
Troubleshooting
Flashing
Green
Green
Traffic is present on the
link.
link.
None needed.
None
No traffic is present on the
link.
link.
None needed if there is no activity on the link. Prior to configuration, this is
normal operation.
normal operation.
Checking the LEDs on the RCC
Each RCC is equipped with status LEDs as listed below:
Run/Fail
Active
Standby