Cisco Cisco Packet Data Interworking Function (PDIF) Guía De Administador
Software Management Operations
Upgrading the Operating System Software ▀
Cisco ASR 5000 System Administration Guide ▄
129
Note the “Available” blocks in the last line of the display. After displaying the directory information, the CLI returns to
root and the following prompt appears:
root and the following prompt appears:
[local]host_name#
Download the Software Image from the Support Site
Access to the Cisco support site and download facility is username and password controlled. You must have an active
customer account to access the site and download the StarOS image.
customer account to access the site and download the StarOS image.
Download the software image to a network location or physical device (PCMCIA card) from which it can be uploaded
to the /flash device.
to the /flash device.
Contact your Cisco representative or Cisco TAC for additional information.
Transfer StarOS Image to /flash on the Chassis
Transfer the new operating system image file to the /flash device on the SMC using one of the following methods:
Copy the file from a network location or local device plugged in into the SMC by entering the following
command:
[local]host_name# copy from_url to_url [-noconfirm]
Transfer the file to the /flash device using an FTP client with access to the system.
Important:
Whenever transferring a operating system software image file using the file transfer protocol
(FTP), the FTP client must be configured to transfer the file using binary mode. Failure to use binary transfer
mode will make the transferred operating system image file unusable.
mode will make the transferred operating system image file unusable.
Transfer the file to the /flash device using an SFTP client with access to the system.
Verify that the image file was successfully transferred to the /flash device by running the following Exec mode
command:
command:
[local]host_name# directory /flash
The image filename should appear in the displayed output.
Run the show version /flash/image_filename command to verify the build information.
[localhost_name# show version /flash/image_filename.bin