Cisco Cisco Packet Data Interworking Function (PDIF) Guía De Administador
System Operation and Configuration
▀ Terminology
▄ Cisco ASR 5000 System Administration Guide
20
Terminology
This section defines important terms used throughout this guide.
Contexts
A context is a logical grouping or mapping of configuration parameters that pertain to various physical ports, logical IP
interfaces, and services. A context can be thought of as a virtual private network (VPN).
interfaces, and services. A context can be thought of as a virtual private network (VPN).
The system supports the configuration of multiple contexts. Each context is configured and operates independently of
the others. Once a context has been created, administrative users can configure services, logical IP interfaces, and
subscribers for that context and then bind the logical interfaces to physical ports.
the others. Once a context has been created, administrative users can configure services, logical IP interfaces, and
subscribers for that context and then bind the logical interfaces to physical ports.
You can also assign a domain alias to a context; if a subscriber’s domain name matches one of the configured alias
names for a context, that context is used.
names for a context, that context is used.
Ports
Ports are the physical connectors on line cards that support remote access and subscriber traffic. Port configuration
includes traffic profiles, data encapsulation methods, media type, and other information for physical connectivity
between the system and the rest of the network.
includes traffic profiles, data encapsulation methods, media type, and other information for physical connectivity
between the system and the rest of the network.
Ports are identified by the chassis slot number for the line card, followed by the physical connector number. For
example, Port 24/1 identifies connector number 1 on the SPIO card in slot 24.
example, Port 24/1 identifies connector number 1 on the SPIO card in slot 24.
Associate ports with contexts through bindings. For additional information on bindings, refer to the Bindings section
below. You can configure each physical port to support multiple logical IP interfaces, each with up to 17 IP addresses
(one primary and up to 16 secondaries).
below. You can configure each physical port to support multiple logical IP interfaces, each with up to 17 IP addresses
(one primary and up to 16 secondaries).
For complete information on line cards and port assignments, refer to the ASR 5000 Installation Guide.
Logical Interface
You must associate a port with a virtual circuit or tunnel called a logical interface before the port can allow the flow of
user data. A logical interface within the system is the assignment of a virtual router instance that provides higher-layer
protocol transport, such as Layer 3 IP addressing. Interfaces are configured as part of the VPN context and are
independent from the physical port that will be used to bridge the virtual interfaces to the network.
user data. A logical interface within the system is the assignment of a virtual router instance that provides higher-layer
protocol transport, such as Layer 3 IP addressing. Interfaces are configured as part of the VPN context and are
independent from the physical port that will be used to bridge the virtual interfaces to the network.
There are several types of logical interfaces to configure to support Simple and Mobile IP data applications.
Management Interface
This interface provides the point of attachment to the management network. The interface supports remote access to the
command line interface (CLI). It also supports Common Object Request Broker Architecture (CORBA)-based
management via the Web Element Manager application, and event notification via the Simple Network Management
Protocol (SNMP).
command line interface (CLI). It also supports Common Object Request Broker Architecture (CORBA)-based
management via the Web Element Manager application, and event notification via the Simple Network Management
Protocol (SNMP).
Define management interfaces in the local context and bind them to the ports on the Switch Processor Input/Output
(SPIO) cards.
(SPIO) cards.