Cisco Cisco Packet Data Interworking Function (PDIF) Guía De Administador
Congestion Control
▀ Configuring Congestion Control
▄ Cisco ASR 5000 System Administration Guide
262
Verify MME Congestion Action Profiles
To verify MME multilevel congestion action profiles, run the following Exec mode command:
show lte-policy congestion-action-profile { name profile_name | summary }
Disconnecting Subscribers Based on Call or Inactivity Time
During periods of heavy system load, it may be necessary to disconnect subscribers in order to maintain an acceptable
level of system performance. You can establish thresholds to select subscribers to disconnect based on the length of time
that a call has been connected or inactive.
level of system performance. You can establish thresholds to select subscribers to disconnect based on the length of time
that a call has been connected or inactive.
To enable overload disconnect for the currently selected subscriber, use the following configuration example:
configure
context context_name
subscriber name subscriber_name
default overload-disconnect threshold inactivity-time dur_thresh
default overload-disconnect threshold connect-time dur_thresh
end
To disable the overload disconnect feature for this subscriber, use the following configuration example:
configure
context context_name
subscriber subscriber_name
no overload-disconnect {[threshold inactivity-time] | [threshold connect-
time]}
time]}
end
Notes:
overload-disconnect is not supported for the Call Session Control Function (CSCF) service.