Cisco Cisco Packet Data Interworking Function (PDIF) Guía De Administador
Routing
Bidirectional Forwarding Detection ▀
Cisco ASR 5000 System Administration Guide ▄
279
Configuring IPv6 BFD for Static Routes
Enable BFD on an Interface
config
context bfd_context_name
interface if_name
ipv6 address ipv6_address ipv6_mask
bfd interval interval_value min_rx rx_value multiplier multiplier_value
[ [no] bfd echo ]
exit
Configure BFD static route.
ipv6 route static bfd if_name ipv6_gw_address
Add static routes.
ipv6 route ipv6_address ipv6_mask
ipv6 route ipv6_address ipv6_mask
Important:
On the ASR 5000, static routes with IPv6 prefix lengths less than /12 and between the range of /64
and /128 are not supported.
Configuring BFD for Single Hop
Enable BFD on an interface.
config
context bfd_context_name
interface if_name
ip address ipv4_address ipv4_mask
ipv6 address ipv6_address ipv6_mask
bfd interval interval_value min_rx rx_value multiplier multiplier_value
[ [no] bfd echo ]
exit