Cisco Cisco Packet Data Interworking Function (PDIF) Guía De Administador
Verifying and Saving Your Configuration
▀ Saving the Configuration
▄ Cisco ASR 5000 System Administration Guide
94
Saving the Configuration
These instructions assume that you are at the root prompt for the Exec mode:
[local]host_name#
To save your current configuration, enter the following command:
save configuration url [ obsolete-encryption | showsecrets | verbose ] [ -
redundant ] [ -noconfirm ]
redundant ] [ -noconfirm ]
url specifies the location in which to store the configuration file. It may refer to a local or a remote file
For complete information about the above command, see the Exec Mode Commands chapter of the Command Line
Interface Reference.
Interface Reference.
Important:
Do not use the “/” (forward slash), “:” (colon) or “@” (at sign) characters when entering a string for
the following URL fields: directory, filename, username, password, host or port#.
Important:
The
-redundant
keyword is only applicable when saving a configuration file to local devices. This
command does not synchronize the local file system. If you have added, modified, or deleted other files or directories to
or from a local device for the active SMC, you must synchronize the local file system on both SMCs.
or from a local device for the active SMC, you must synchronize the local file system on both SMCs.
To save a configuration file called system.cfg to a directory that was previously created called cfgfiles on the
CompactFlash in the SMC, enter the following command:
CompactFlash in the SMC, enter the following command:
save configuration /flash/cfgfiles/system.cfg
To save a configuration file called simple_ip.cfg to a directory called host_name_configs, using an FTP server with an
IP address of 192.168.34.156, on which you have an account with a username of administrator and a password of
secure, use the following command:
IP address of 192.168.34.156, on which you have an account with a username of administrator and a password of
secure, use the following command:
save configuration ftp://administrator:secure@192.168.34.156/host_name_configs/
simple_ip.cfg
simple_ip.cfg
To save a configuration file called init_config.cfg to the root directory of a TFTP server with a hostname of
config_server, enter the following command:
config_server, enter the following command:
save configuration tftp://config_server/init_config.cfg