Cisco Cisco Packet Data Gateway (PDG) Guía De Administador
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Intelligent Traffic Control
Configuring Flow-based Traffic Policing ▀
Cisco ASR 5x00 Home Agent Administration Guide ▄
263
qos traffic-police committed <bps> peak <bps> burst-size <byte> exceed-action {
drop | lower-ip-precedence | allow } violate-action { drop | lower-ip-precedence | allow
}
drop | lower-ip-precedence | allow } violate-action { drop | lower-ip-precedence | allow
}
qos encaps-header dscp-marking [ copy-from-user-datagram | <dscp_code> ]
end
Notes:
<vpn_context_name>
is the name of the destination context in which is configured during Class-Map
configuration for flow-based traffic policing.
<policy_name>
is the name of the traffic policy map you want to configure for the flow-based traffic policing.
A maximum of 32 policy maps can be configured in one context.
<class_name>
is the name of the traffic class to map that you configured in Configuring Class Maps section
for the flow-based traffic policing.
For description and variable values of these commands and keywords, refer to the Traffic Policy-Map
Configuration Mode Commands chapter of the Command Line Interface Reference.
Configuring Policy Groups
This section provides information and instructions for configuring the policy group in a context to support flow-based
traffic policing.
traffic policing.
configure
context <vpn_context_name>
policy-group name <policy_group>
policy <policy_map_name> precedence <value>
end
Notes:
<vpn_context_name>
is the name of the destination context which is configured during Class-Map
configuration for flow-based traffic policing.
<policy_group>
is name of the traffic policy group of policy maps you want to configure for the flow-based
traffic policing. A maximum of 32 policy groups can be configured in one context.
<policy_map_name>
is name of the traffic policy you configured in Configuring Policy Maps section for the
flow-based traffic policing. A maximum of 16 Policy Maps can be assigned in a Policy Group.
For description and variable values of these commands and keywords, refer to the Traffic Policy-Map
Configuration Mode Commands chapter of the Command Line Interface Reference.
Configuring a Subscriber for Flow-based Traffic Policing
This section provides information and instructions for configuring the subscriber for Flow-based Traffic Policing.
configure