Cisco Cisco Packet Data Interworking Function (PDIF) Guía De Administador
Network Mobility (NEMO)
NEMO Configuration ▀
Cisco ASR 5x00 Home Agent Administration Guide ▄
229
NEMO Configuration
Important:
Commands used in the configuration samples in this section provide base functionality to the extent
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
To configure the system for NEMO:
1. Create a VRF on the router and assign a VRF name.
2. Set the neighbors and address family to exchange routing information with a peer router.
3. Redistribute connected routes between routing domains.
4. Create a NEMO HA.
5. Save your configuration to flash memory, an external memory device, and/or a network location using the Exec
mode command
save configuration
. For additional information on how to verify and save configuration
files, refer to the System Administration Guide and the Command Line Interface Reference.