Cisco Cisco Packet Data Interworking Function (PDIF) Guía De Administador

Descargar
Página de 308
Supported Registration Reply Codes   
▀  HA Service Reply Codes 
 
 
▄  Cisco ASR 5x00 Home Agent Administration Guide 
86 
   
HA Service Reply Codes 
The following registration reply codes are supported by the system’s HA service in accordance with the following 
Request For Comments (RFCs): 
 
RFC-2002, IPv4 Mobility, May 1995 
 
RFC-2344, Reverse Tunneling for Mobile IP, May 1998 
Table 13.  Supported HA Service Registration Reply Codes 
Reply Code 
(Hex / Base 
10)
 
Description
 
Note
 
80H / 128
 
Registration Denied - reason unspecified
 
Sent when internal errors are encountered when processing the 
Request packet.
 
81H / 129
 
Registration Denied - administratively 
prohibited
 
Sent when a newcall policy is set to reject calls or the subscriber is 
not permitted to use Mobile IP HA services.
 
82H / 130
 
Registration Denied - insufficient 
resources
 
Sent when no memory or session managers are available to process 
the session.
 
83H / 131
 
Registration Denied - mobile node failed 
authentication
 
Sent when the mobile node failed authentication.
 
84H / 132
 
Registration Denied - foreign agent failed 
authentication
 
Sent when an FA attempted to communicate with the HA service 
using an incorrect security parameter index (SPI).
 
85H / 133
 
Registration Denied - registration 
Identification mismatch
 
Sent when the ID sent by the mobile node in the RRQ is different 
from the expected value.
 
86H / 134
 
Registration Denied - poorly formed 
request
 
Sent when the registration request is poorly formed (i.e. missing an 
Authentication extension).
 
87H / 135
 
Registration Denied - too many 
simultaneous mobility bindings
 
Sent when the mobile node has exceeded the maximum number of 
mobile bindings that the HA service supports for a single subscriber.
 
88H / 136
 
Registration Denied - unknown home 
agent address
 
Sent when HA redirect policy is invoked.
 
89H / 137
 
Registration Denied - reverse tunneling 
unavailable
 
Sent when reverse tunneling is requested by the mobile node but it is 
not enabled on the system.
 
8AH / 138
 
Registration Denied - reverse tunneling 
mandatory
 
Sent when reverse tunneling is enabled on the system but is not 
supported by the mobile node.
 
8BH / 139
 
Registration Denied - reverse tunneling 
encapsulation style unavailable
 
Sent if the Encapsulating Delivery Style Extension sent by the 
mobile is not supported by the HA service.
 
8DH / 141
 
Registration Denied - unsupported 
Vendor-ID or unable to interpret Vendor-
CVSE-Type.
 
Sent if the Vendor Identification is unsupported or the HA is unable 
to interpret the Vendor-CVSE-Type in the CVSE sent by the Foreign 
Agent to the Home Agent.
 
8EH / 142
 
Registration Denied - Requested UDP 
tunnel encapsulation unavailable
 
Sent by the HA if a UDP tunneling mode is not available.