Cisco Cisco Packet Data Gateway (PDG) Prospecto

Descargar
Página de 4162
  show active-charging 
show active-charging fw-and-nat policy name  ▀   
 
Cisco ASR 5x00 Statistics and Counters Reference  ▄  
 
   
2607 
Field
 
Description
 
Unknown Hop By Hop Options 
Indicates status of protection against IPv6 packets containing unknown hop-by-hop 
options. 
IPv6 Destination Options 
Indicates status of protection against IPv6 packets containing IPv6 destination 
options header. 
Invalid Destination Options 
Indicates status of protection against IPv6 packets containing invalid destination 
options. 
Unknown Destination Options 
Indicates status of protection against IPv6 packets containing unknown destination 
options. 
IPv6 Nested Fragmentation 
Indicates status of protection against IPv6 packets containing IPv6 nested 
fragmentation. 
Max-Packet-Size 
ICMP 
For ICMP protocol, the maximum IP packet size (after IP reassembly) allowed over 
Stateful Firewall. 
Non-ICMP 
For non-ICMP protocol, the maximum IP packet size (after IP reassembly) allowed 
over Stateful Firewall. 
Flooding 
ICMP limit 
The maximum number of ICMP packets allowed during a sampling interval. 
UDP limit 
The maximum number of UDP packets allowed during a sampling interval. 
TCP-SYN limit 
The maximum number of TCP-SYN packets allowed during a sampling interval. 
Sampling Interval 
The flooding sampling interval, in seconds. 
TCP-SYN Flood Intercept 
Mode 
The TCP SYN flood intercept mode. 
 
none 
 
intercept 
 
watch 
Watch-timeout 
The TCP intercept watch timeout, in seconds. 
Mime-Flood Params 
HTTP Header-Limit 
The maximum number of headers allowed in an HTTP packet. 
HTTP Max-Header-Field-Size 
The maximum header field size allowed in an HTTP header, in bytes. 
No Firewall Ruledef Match Action 
Uplink Action 
Action configured for uplink packets with no access ruledef matches. 
Uplink Charging-Action 
Charging action configured for uplink packets with no access ruledef matches. 
Uplink NAT-Realm 
The NAT-realm to be used if none of the firewall ruledefs are matched for the 
uplink traffic.