Cisco Cisco Packet Data Gateway (PDG) Prospecto
show ip
▀ show ip pool verbose
▄ Cisco ASR 5x00 Statistics and Counters Reference
3486
Field
Description
Priority
Identifies the priority of the IP pool (0 = highest, 10 = lowest)
Group
Identifies the group to which the IP pool belongs.
VRF
Identifies the VRF name.
Used
Specifies the number of IP addresses currently in use in this pool.
Free
Specifies the number of IP addresses currently available for use in this pool.
Hold
Specifies the number of IP addresses currently unavailable and on hold for the subscribers
that just disconnected in case a reconnect occurs within the range of the
that just disconnected in case a reconnect occurs within the range of the
address-hold-timer
value configured in the
ip pool
command.
Released
Specifies the number of IP addresses in this pool that are in the process of being released
(from general use or the hold state).
(from general use or the hold state).
Addr-Hold-Timer
Identifies the
address-hold-timer
value configured in the
ip pool
command.
Limit Exceeded
Specifies the number of times the hold timer limit was exceeded and the IP address being
held was returned to an available or free state.
held was returned to an available or free state.
Total Alloc Req
Specifies the total number of IP address requests made to this pool.
Total Rel Req
Specifies the total number of IP address release requests made to this pool.
Input Label
Identifies the input label for the VRF.
Output Label
Identifies the output label for the VRF.
Network Reachability Detection
Server
Server
Identifies the name of a configured network reachability server that is bound to the IP
pool.
pool.
Unicast Gratuitous-ARP Address
Identifies if the ability to perform a unicast gratuitous ARP to the specified IP address
rather than broadcast gratuitous ARP when gratuitous ARP generation is required is
enabled for this pool.
rather than broadcast gratuitous ARP when gratuitous ARP generation is required is
enabled for this pool.
Nexthop Forwarding Address
Identifies the IP address of the next hop gateway where a subscriber that is assigned an IP
address from this pool is forwarded.
address from this pool is forwarded.
Vlan ID
Identifies the VLAN ID that enables over-lapping IP address pool support and associates
the pool with the specified virtual LAN (VLAN).
the pool with the specified virtual LAN (VLAN).
Suppress-Switchover-ARPS
Identifies if the ability to suppress corresponding gratuitous ARP generation when a line
card switchover occurs is enabled or disabled for this pool.
card switchover occurs is enabled or disabled for this pool.
Send-ICMP-Dest-Unreachable
Specifies whether or notvan ICMP destination unreachablevPDU is generated when the
system receives a PDU destined for an unused address within the pool.
system receives a PDU destined for an unused address within the pool.
Explicit-Route-Advertise
If a pool is configured with this option, then none of the fragment addresses for this pool
are added to the kernel. However, the fragment addresses are added to the NPU. As the
calls come up and addresses from this pool (with the new option) are used, these addresses
are added to the kernel.
are added to the kernel. However, the fragment addresses are added to the NPU. As the
calls come up and addresses from this pool (with the new option) are used, these addresses
are added to the kernel.
Advertise-if-used
Indicates if the option is enabled to use advertise address or not.
Include-Network-Broadcast-Address
Indicates whether IP pool is configured to include network broadcast address or not.
Allow-Static-Allocation
Indicates whether IP pool configured to allow static allocation of IP address or not.