Cisco Cisco WAP4410N Wireless-N Access Point - PoE Advanced Security Notas de publicación
Release Notes for WAP4410N Access Point Firmware Version 2.0.7.4
5
Release Notes
Changes Since WAP4410N Firmware Version 2.0.4.1
The firmware was updated and the following was fixed in firmware version 2.0.4.2.
•
WDS mode with repeater options and TKIP/AES encryption is fixed.
Changes Since WAP4410N Firmware Version 2.0.3.3
The firmware was updated and problems were fixed in firmware version 2.0.4.1.
•
Updated LSDK and WLAN driver.
•
Added Ethernet Duplex Mode and Date Rate settings.
•
Fixed WDS connection issue when using WPA/WPA2 security.
•
Fixed memory leak issue.
Known Issues
These known issues were identified in firmware version 2.0.4.1.
•
Space(s) in the SSID are allowed but currently they will cause the SSID to display as a
blank string. Selecting the blank SSID with connect and feature performance is not
affected.
blank string. Selecting the blank SSID with connect and feature performance is not
affected.
•
There are known issues regarding wireless isolation, affecting both between SSIDs and
within SSIDs.
within SSIDs.
Workaround: None.
•
Google Chrome browser does not support the loading of the firmware upgrade.
Workaround: Perform the firmware upgrade using Firefox or Internet Explorer (IE).
•
From the Wireless tab, select the security settings page. On this page, click the “Help”
link located in the top right corner. There is an incorrect spelling on this page; the word
“with” should be “within.”
link located in the top right corner. There is an incorrect spelling on this page; the word
“with” should be “within.”