Cisco Cisco Packet Data Interworking Function (PDIF) Guía De Instalación Rápida
Subscriber Thresholds
▀ Active Subscriber Thresholds
▄ Cisco ASR 5x00 Thresholding Configuration Guide
146
Active Subscriber Thresholds
Active subscriber thresholds generate alerts or alarms based on the total number of active subscriber sessions facilitated
by the system during the specified polling interval.
by the system during the specified polling interval.
Alerts or alarms are triggered for active subscriber totals based on the following rules:
Enter condition: Actual total number of active subscriber sessions > or = High Threshold
Clear condition: Actual total number of active subscriber sessions < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
polling interval.
This section provides instructions for configuring active subscriber thresholding. These instructions assume that you are
at the prompt for the Global Configuration mode:
at the prompt for the Global Configuration mode:
Configuring Active Subscriber Thresholds
Use the following example to configure the active subscriber thresholds:
configure
threshold subscriber active <high_thresh> [ clear <low_thresh> ]
threshold poll active-subscriber interval <time>
threshold monitoring subscriber
end