Cisco Cisco Aironet 350 Wireless LAN Client Adapter Notas de publicación
6
Release Notes for Cisco Aironet 802.11a/b/g (CB21AG and PI21AG) Client Administration Utility (ACAU) 2.5
OL-8084-01
New and Changed Information
•
Thresholds—You can now perform the following threshold-related tasks:
–
Configure threshold values that trigger audible alerts, entries in the threshold log file, or both
–
Enable audible threshold alerts and the logging of text messages to the threshold log file when
a threshold condition occurs
a threshold condition occurs
–
Enter a comment in the threshold log file
–
View or delete the threshold log file
•
AP scanning—You can now perform the following tasks related to AP scanning:
–
Configure the site survey utility to automatically copy the contents of the AP scan list to a log
file
file
–
Enable AP scan logging
–
View or delete the AP scan log
–
Save or open the AP scan list
•
Status bar indicators—Four indicators on the site survey utility’s status bar indicate when certain
features are enabled:
features are enabled:
–
PRX—The proximity beeper is enabled.
–
ALR—Threshold alerts are enabled.
–
LOG—Threshold logging is enabled.
–
APS—Automatic AP scan list logging is enabled.
The site survey utility is a stand-alone application, separate from ADU, that runs from an executable file.
If you check the Install Cisco Aironet Site Survey Utility check box during installation of Install Wizard
2.5, the site survey executable file is installed in the C:\Program Files\Cisco Aironet directory (unless
you specify a different directory).
If you check the Install Cisco Aironet Site Survey Utility check box during installation of Install Wizard
2.5, the site survey executable file is installed in the C:\Program Files\Cisco Aironet directory (unless
you specify a different directory).
Note
The site survey utility can be used only with CB21AG and PI21AG client adapters.
Note
Refer to Appendix F of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and
PI21AG) Installation and Configuration Guide (OL-4211-04) for more information on the site survey
utility.
PI21AG) Installation and Configuration Guide (OL-4211-04) for more information on the site survey
utility.
Profile Migration Tool
A profile migration tool is now available for the CB21AG and PI21AG client adapters. This tool is
designed to migrate Cisco Aironet 350 series and CB20A wireless LAN client adapter profiles to profiles
that can be used with Cisco Aironet CB21AG and PI21AG client adapters. The tool is meant to migrate
profiles with minimal modification, but its behavior can be altered by command line options. The legacy
350 and CB20A profiles are not deleted or modified in any way.
designed to migrate Cisco Aironet 350 series and CB20A wireless LAN client adapter profiles to profiles
that can be used with Cisco Aironet CB21AG and PI21AG client adapters. The tool is meant to migrate
profiles with minimal modification, but its behavior can be altered by command line options. The legacy
350 and CB20A profiles are not deleted or modified in any way.
Cisco expects the profile migration tool to be executed once, most likely immediately after installing or
updating the CB21AG/PI21AG client adapter software. Upon completion, the profile migration tool may
be removed from the user’s system.
updating the CB21AG/PI21AG client adapter software. Upon completion, the profile migration tool may
be removed from the user’s system.
When the CB21AG/PI21AG client adapter software is installed, the Install Wizard also automatically
installs the profile migration tool, unless the Don’t Install option was chosen in ACAU. It is saved in the
same directory as ADU.
installs the profile migration tool, unless the Don’t Install option was chosen in ACAU. It is saved in the
same directory as ADU.