Cisco Cisco Packet Data Interworking Function (PDIF)
Diameter Dictionaries and Attribute Definitions
Diameter AVP Definitions ▀
AAA Interface Administration and Reference, StarOS Release 18 ▄
293
Override-Rule-Name
Specifies the name of the rule (predefined or static) for which override values are sent. This AVP may be included more
than once if the override values apply for multiple rules. Charging-Action-Name and Exclude-Rule AVPs should not be
sent and will be ignored if this AVP is present.
than once if the override values apply for multiple rules. Charging-Action-Name and Exclude-Rule AVPs should not be
sent and will be ignored if this AVP is present.
Vendor ID
9
VSA Type
132018
AVP Type
OCTETSTRING
AVP Flag
N/A
Override-Service-Identifier
This AVP is used to override the value of Service Identifier configured in the charging action.
Vendor ID
9
VSA Type
132023
AVP Type
UINT32
AVP Flag
N/A
Override-Tos-Direction
This AVP indicates the Override Type of Service (ToS) direction. Value 0 indicates Uplink direction, 1 denotes Downlink
direction, 2 denotes both Uplink and Downlink. If AVP is not present it denotes both Uplink and Downlink.
direction, 2 denotes both Uplink and Downlink. If AVP is not present it denotes both Uplink and Downlink.
Vendor ID
9
VSA Type
132047
AVP Type
ENUM
Supported enumerated value(s):
0 UPLINK_DIRECTION
1 DOWNLINK_DIRECTION
2 BIDIRECTIONAL
AVP Flag
N/A