Cisco Cisco Packet Data Interworking Function (PDIF)
System Settings
Configuring MIO/UMIO Port Redundancy ▀
ASR 5500 System Administration Guide, StarOS Release 18 ▄
73
Verifying Port Redundancy Auto-Recovery
Verify port information by entering the following command
show port info slot#/port#
slot# is the chassis slot number of the MIO/UMIO card on which the physical port resides.
port# is the physical port on the MIO/UMIO.
The following shows a sample output of this command for port 1 on the MIO/UMIO in slot 5:
[local]host_name# show port info 5/1
Port: 5/1
Port Type : 1000 Ethernet
Role : Management Port
Description : (None Set)
Redundancy Mode : Port Mode
Redundant With : 6/1
Preferred Port : Non-Revertive
Physical ifIndex : 83951616
Administrative State : Enabled
Configured Duplex : Auto
Configured Speed : Auto
Configured Flow Control : Enabled
Interface MAC Address : 02-05-47-B8-2F-41
Fixed MAC Address : 02-05-47-B8-2F-41
Link State : Up
Link Duplex : Full
Link Speed : 1000 Mb
Flow Control : Disabled
Link Aggregation Group : None
Logical ifIndex : 83951617
Operational State : Up, Active
Port: 5/1
Port Type : 1000 Ethernet
Role : Management Port
Description : (None Set)
Redundancy Mode : Port Mode
Redundant With : 6/1
Preferred Port : Non-Revertive
Physical ifIndex : 83951616
Administrative State : Enabled
Configured Duplex : Auto
Configured Speed : Auto
Configured Flow Control : Enabled
Interface MAC Address : 02-05-47-B8-2F-41
Fixed MAC Address : 02-05-47-B8-2F-41
Link State : Up
Link Duplex : Full
Link Speed : 1000 Mb
Flow Control : Disabled
Link Aggregation Group : None
Logical ifIndex : 83951617
Operational State : Up, Active