Cisco Cisco Packet Data Gateway (PDG)
Routing
▀ Viewing Routing Information
▄ ASR 5500 System Administration Guide, StarOS Release 17
262
Viewing Routing Information
To view routing information for the current context, run one of the following Exec mode commands;
show ip route: Displays information for IPv4 routes in the current context.
show ipv6 route: Displays information for ipv6 routes in the current context.
show ip static-route: Displays information only for IPv4 static routes in the current contextospf.
show ip ospf: Displays IPv4 OSPF process summary information in the current context.
show ipv6 ospf: Displays IPv6 OSPFv3 process summary information in the current context.
show ip bgp: Displays IPv4 BGP information.
This example shows sample output of the command, show ip route.
[local]host_name# show ip route
"*" indicates the Best or Used route.
Destination Nexthop Protocol Prec Cost Interface
*44.44.44.0/24 208.230.231.50 static 1 0 local1
*192.168.82.0/24 0.0.0.0 connected 0 0
*192.168.83.0/24 0.0.0.0 connected 0 0
208.230.231.0/24 0.0.0.0 ospf 110 10 local1
*208.230.231.0/24 0.0.0.0 connected 0 0 local1
Total route count: 5
"*" indicates the Best or Used route.
Destination Nexthop Protocol Prec Cost Interface
*44.44.44.0/24 208.230.231.50 static 1 0 local1
*192.168.82.0/24 0.0.0.0 connected 0 0
*192.168.83.0/24 0.0.0.0 connected 0 0
208.230.231.0/24 0.0.0.0 ospf 110 10 local1
*208.230.231.0/24 0.0.0.0 connected 0 0 local1
Total route count: 5