Cisco Cisco Packet Data Interworking Function (PDIF)
Management Settings
ORBEM and the Web Element Manager ▀
ASR 5500 System Administration Guide, StarOS Release 17 ▄
79
If a firewall exists between the system and the Web Element Manager, open the SIOP port number and the TCP
port number 15011.
If the ORB Notification Service is enabled via the event-notif-service command, you can set filters to determine
which events are to be sent. By default, the Service sends all error and higher level events, “info” level events
for the ORBS facility, CLI command logs, and license change logs. Optionally, configure a filter by including
the event-notif-service filter command. Enter this command for each filter you need to configure.
for the ORBS facility, CLI command logs, and license change logs. Optionally, configure a filter by including
the event-notif-service filter command. Enter this command for each filter you need to configure.
Configuring IIOP Transport Parameters
Use the following example to configure Internet Inter-ORB Protocol (IIOP) transport parameters that enable ORB-based
management to be performed over the network:
management to be performed over the network:
configure
orbem
iiop-transport
iiop-port iiop_port_number
event-notif-iiop-port iiop_notif_port
end
Notes:
If you are using the Secure Sockets Layer (SSL) option, do not enable the IIOP transport parameter. The WEM
default process enforces SSL.
You configure the ORBEM interface to use SSL by specifying a certificate and private key.