Cisco Cisco Packet Data Interworking Function (PDIF)
Troubleshooting
Using the System Diagnostic Utilities ▀
ASR 5500 System Administration Guide, StarOS Release 16 ▄
203
<<<<OUTBOUND 10:02:35:518 Eventid:25001(0)
PPP Tx PDU (14)
IPCP 14: Conf-Nak(2), IP-Addr=192.168.250.87
INBOUND>>>>> 10:02:35:519 Eventid:25000(0)
PPP Rx PDU (12)
IPCP 12: Conf-Req(3), IP-Addr=192.168.250.87
The monitor remains active until disabled. To quit the protocol monitor and return to the prompt, press q.
Using the DHCP Testing Tool
The CLI provides a mechanism for testing network connectivity with and configuration of DHCP servers. This
functionality can help determine the accuracy of the system’s DHCP configuration and the server’s response time.
functionality can help determine the accuracy of the system’s DHCP configuration and the server’s response time.
This tool provides a mechanism for obtaining an IP address for one or more DHCP servers with which the system
communicates.
communicates.
Important:
This tool must be executed from the context in which the DHCP server(s) are configured.
To execute the DHCP test tool enter the following command within the appropriate context:
dhcp test dhcp-service { service_name } [ all | server ip_addr ]
For complete information on the above command, see the Exec Mode Commands chapter of the Command Line
Interface Reference.
Interface Reference.